Start the New Year Right with Energy Savings

For maximum efficiency, your refrigerator should be between 38 to 40 degrees, and the freezer compartment should be set to 5 degrees. Photo Credit: Marcela Gara, Resource Media

By Pat Keegan and Brad Thiessen

Is it possible to cut your energy bills in half? Although it may sound like it would take a lot of time and money to get there, this end result is not far-fetched. If you’re looking to accomplish those kinds of results, keep reading. There are several energy-saving measures you can do right away and others you can plan for to achieve greater savings down the road.

1. Dial in savings.

Setting back your thermostat by 7 to 10 degrees for eight hours a day can save you up to 10% per year on home heating and cooling. Photo Credit: Consumers Energy

Now: The first place to start is your home thermostat. In most homes, the largest portion of the energy bill goes toward heating and cooling. Setting back your thermostat by 7 to 10 degrees for eight hours a day can save you up to 10% per year on heating and cooling. In the winter, you could aim for 56 degrees at night and when no one is at home, and 68 degrees when you’re up and around. If you’re used to a warmer house, it may mean throwing on a sweater or pair of slippers. It should be noted this tactic is not as effective for some homes with radiant heat systems.

Later: Make sure to adjust your air conditioning settings next summer. If you have a manual thermostat and don’t always remember to adjust it, consider purchasing a smart thermostat, or at least one that’s programmable.

2. Set refrigerator and freezer temps for efficiency.
Now: Make sure your refrigerator and freezer aren’t set to a colder temperature than needed. The refrigerator should be at 38 to 40 degrees and the freezer compartment should be 5 degrees. If you have a separate chest freezer, set it to 0 degrees. Also check your water heater setting — aim for a setting of 120 degrees.

Later: Old refrigerators and freezers can use a lot of electricity. If yours was made before 1993, you can save upwards of $65 a year with a new ENERGY STAR® model. If you eliminate a second refrigerator or freezer, you can save even more, especially if they are stored in your garage.

3. Maximize the heat you have.
Now: Look around each room and make sure the vents and radiators aren’t blocked by furniture or other objects. If the floors feel cold even when the room is warm, put down area rugs for additional warmth. Open curtains and blinds to let the sunshine in, and close them at night.

Later: Enlist the help of an energy auditor or HVAC specialist to test for duct leakage and ensure your whole system is balanced and running efficiently.

4. Make bright moves with your lights.
Now: The obvious first step is to make sure lights are turned off when they’re not in use. You can do this manually or employ one of many automated strategies. If you’re still using incandescent bulbs, you could switch the five most-used bulbs to LEDs and save about $75 per year. LEDs last much longer and use about one-fourth as much energy. Prices on LED bulbs have decreased in the past few years, and you can save more if you buy them in packs.

Later: Over time, plan to replace all your old incandescent bulbs and consider smart lighting options that can be programmed to turn off when a room is not in use.

5. Eliminate drafts.

Carefully insulating around outlets on exterior-facing walls is a simple way to eliminate drafts. Photo Credit: Marcela Gara, Resource Media

Now: Look carefully around your home for signs of air leaks. If you have a gap under an exterior door, you can block it with a towel or, better yet, apply some weather stripping. Make sure windows are sealed with caulk, and you can also seal areas around plumbing and wiring penetrations.

Later: Have an energy auditor do a blower door test, which is the best to identify all air leaks.

Taking some of these easy steps now should provide some quick energy savings. To save even more, you’ll need a plan that includes the “later” steps we shared above. An energy audit can help you determine a much better plan, and your electric co-op may be able to provide an audit or recommend a qualified local auditor.

This column was co-written by Pat Keegan and Brad Thiessen of Collaborative Efficiency. For more information on starting the New Year right with energy saving, please visit: